Vista Super Create is an acrylic polymer based Cementitious coating and repairing compounds when used as recommended, combines with cement and fine sand to form an impermeable coating by blocking the capillaries and pores of the substrate of concrete. It is also UV resistant.
USES :
Vista Super Crete is recommended for use in all structures that required to be water- proofed and protected against the ingress of moisture, like Roof / Terrace, Base- ments, Water Tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Sewage
Tanks, Reservoirs, Dams, Dock Gates etc.
Advantages:
-
Excellent bond with most of the building material.
-
Low permeability makes mortar or concrete waterproof.
-
Imparts chemical resistance to substrate.
-
Reduces or prevents salt penetration into concrete and mortar.
-
Non toxic and can be used in water tank.
- Eco friendly, harmless to workers.
APPLICATION:
Substrate must be sound, clean free from loose particles or laitance and preferable wire brushed. The surface to receive the coating is to be checked first, fi there are any cracks. If any cracks exist, it has to be repaired with cement mortar admixed with Vista Super Crete. Undulation a n d depression is to be filled and levelled to obtain even surface. The prepared surface must be thoroughly wetted with water and ti has to be ensured that there si no standing water on the surface, before application of the coating.
CURING:
After application of final coat of Vista Super Crete initial air drying shall be done for 2 to 6 hours during this period. No water should be used for curing. Over the coated surface, water si to be sprinkled after 6-10 hrs. Mild curing is to b e d o n e after 24 hours of application. After 72 hours
curing is to be done vigorously and finally kept submerged in water for seven days. Good results can be obtained in curing fi carried on for further period of time.
